Order of second-hand generator
rental in Dongguan
Removing as much old grease as possible is an important method to prevent grease deterioration, leakage and contamination, and it is also the key to avoid incompatible grease blending. Therefore, after confirming the replacement time and replacement amount, you must follow a rigorous rinsing and fat changing procedure! Dongguan second-hand generator
rental takes rolling bearings equipped with grease openings and grease outlets as an example. The 5-step "decompression method" can be used to clean and clean the cleaning process.
1. Disassembly: Remove the grease drain bolt located below, and remove all hardened grease from the grease drain;
2. Wipe: Wipe the grease opening;
3. Note: Inject the grease into the grease port until the new grease is drained from the grease outlet, ensuring that all the old grease has been drained. In the case of ensuring that the equipment operating environment is safe and feasible, this step can be performed while the equipment is running;
4. Discharge: No need to install grease drain bolts, the motor runs normally and maintains the operating temperature, the grease will be extended to distribute evenly, until excess grease is discharged from the grease drain, thereby reducing internal pressure;
5. Installation: Remove excess grease and install grease drain bolts.
Choosing the right grease is the basis for the renewal of the entire motor bearing. With the increasingly severe lubrication environment of generator equipment, it is very important to choose a high-performance grease. Grease is a semi-solid lubricant consisting of a base oil, a thickener and additives. High-quality motor greases are based on typical indicators such as viscosity, consistency, oxidation resistance, anti-wear, drip point, and shear stability Both performed well. http://kongtiaoweixiu0.cn/